This sysctl works only when the interface has never been marked up as done by ifconfig up. The de- fault value is Different interfaces can be assigned dif- ferent values via the dev. The default is 7 all al- lowed. The driver selects the best possible type out of the al- lowed types. The default is The default value is 0. A value of of 2 would ensure that the Ethernet payload usually the IP header is at a 4 byte aligned address.
The de- fault is -1 which lets the driver pick a pad boundary. Settings can be displayed and controlled on a per-port basis via the dev. Finer grained control can be achieved by setting individual bits. These bits can be set together in any combination. This tunable establishes the default FEC settings for all ports. Settings can be dis- played and controlled on a per-port basis via the dev.
This tunable establishes the de- fault autonegotiation settings for all ports. The default is -1 which lets the driver pick a value. The default is -1 which lets the driver decide.
The defaults are and respectively. A configuration file contains a recipe for partitioning and configuring the hard- ware resources on the card. This tunable is for specialized ap- plications only and should not be used in normal operation. Skip site navigation 1 Skip section navigation 2 Header And Logo. Peripheral Links. Donate to FreeBSD. Through it you can specify the kernel to be booted, parame- ters to be passed to it, and additional modules to be loaded; and gener- ally set all variables described in loader 8.
Also, the behavior of some settings is defined by the setting's suffix; the prefix identifies which module the setting con- trols.
The settings that receive special treatment are listed below. All such settings shar- ing a common prefix refer to the same module. Donate to FreeBSD. Through it you can specify the kernel to be booted, parame- ters to be passed to it, and additional modules to be loaded; and gener- ally set all variables described in loader 8. Also, the behavior of some settings is defined by the setting's suffix; the prefix identifies which module the setting con- trols.
The settings that receive special treatment are listed below. All such settings shar- ing a common prefix refer to the same module. This type of setting cannot be processed by programs other than loader 8 , so its use should be avoided.
Multiple in- stances of it will be processed independently. The lua-based loader will process files with a ". One cannot depend on any value re- maining in the loader environment or carried over into the kernel environment. If no kernel name is set, no additional modules will be loaded. For example: vfs. The value can also be overridden from the loader 8 command line. The password should be in clear text format. In both cases user should provide specified password to be able to access boot menu.
0コメント